HLK-7621 开发板适配lean github 补丁文件
有买这个开发板的可以先刷breed-mt7621-newifi-d1的引导程序，原厂的bootload不怎么好用，而且不支持新板的lzma内核解压。
--- target/linux/ramips/dts/mt7621_hilink_hlk-7621a.dts
+++ target/linux/ramips/dts/mt7621_hilink_hlk-7621a.dts
@@ -1,14 +1,26 @@
// SPDX-License-Identifier: GPL-2.0-or-later
-/dts-v1/;
#include "mt7621.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
/ {
compatible = "hilink,hlk-7621a", "mediatek,mt7621-soc";
model = "HiLink HLK-7621A";
chosen {
- bootargs = "console=ttyS0,57600";
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
};
};
@@ -19,7 +31,8 @@
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <44000000>;
-
+ broken-flash-reset;
+
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
@@ -53,51 +66,28 @@
};
&switch0 {
- ports {
- port@0 {
- status = "okay";
- label = "lan1";
- };
-
- port@1 {
- status = "okay";
- label = "lan2";
- };
-
- port@2 {
- status = "okay";
- label = "lan3";
- };
-
- port@3 {
- status = "okay";
- label = "lan4";
- };
-
- port@4 {
- status = "okay";
- label = "wan";
- };
- };
+ /* must delete compatible property */
+ /delete-property/ compatible;
};
&gmac0 {
- mtd-mac-address = <&factory 0x8004>;
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
};
&state_default {
gpio {
- groups = "rgmii2", "jtag";
+ groups = "jtag", "uart", "wdt";
function = "gpio";
};
};
&uartlite2 {
- status = "okay";
+ status = "disable";
};
&uartlite3 {
- status = "okay";
+ status = "disable";
};
&xhci {
@@ -105,9 +95,80 @@
};
&sdhci {
- status = "okay";
+ status = "disable";
};
&i2c {
- status = "okay";
+ status = "disable";
+};
+
+&gmac1 {
+ nvmem-cells = <&macaddr_factory_e006>;
+ nvmem-cell-names = "mac-address";
+};
+
+&hnat {
+ mtketh-wan = "eth1";
+ mtketh-ppd = "eth0";
+ mtketh-lan = "eth0";
+ ext-devices = "radio0","radio1","radio2";
+ mtketh-max-gmac = <2>;
+ status = "okay";
+};
+
+&gsw {
+ mediatek,mdio = <&mdio>;
+ mediatek,portmap = "llllw";
+ mediatek,mcm;
+ mt7530,direct-phy-access;
+
+ resets = <&rstctrl 2>;
+ reset-names = "mcm";
+
+ port5: port@5 {
+ compatible = "mediatek,mt753x-port";
+ reg = <5>;
+ phy-mode = "rgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port6: port@6 {
+ compatible = "mediatek,mt753x-port";
+ reg = <6>;
+ phy-mode = "rgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
+
+&factory {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_e000: macaddr@e000 {
+ reg = <0xe000 0x6>;
+ };
+
+ macaddr_factory_e006: macaddr@e006 {
+ reg = <0xe006 0x6>;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&uartlite {
+ status = "okay";
};
--- target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -54,6 +54,7 @@
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
;;
+ hilink,hlk-7621a|\
gehua,ghl-r-001)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "4:wan" "6u@eth0" "5u@eth1"
--- target/linux/ramips/image/mt7621.mk
+++ target/linux/ramips/image/mt7621.mk
@@ -778,10 +778,14 @@
TARGET_DEVICES += hatlab_gateboard-one
define Device/hilink_hlk-7621a
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := HiLink
DEVICE_MODEL := HLK-7621A
- DEVICE_PACKAGES := kmod-usb3
+ SUPPORTED_DEVICES += hlk-7621a
+ DEVICE_COMPAT_VERSION := 1.1
+ DEVICE_PACKAGES := kmod-usb3
endef
TARGET_DEVICES += hilink_hlk-7621a
--- target/linux/ramips/Makefile
+++ target/linux/ramips/Makefile
@@ -10,8 +10,8 @@
SUBTARGETS:=mt7620 mt7621 mt76x8 rt288x rt305x rt3883
FEATURES:=squashfs gpio boot-part rootfs-part
-KERNEL_PATCHVER:=5.4
-KERNEL_TESTING_PATCHVER:=5.10
+KERNEL_PATCHVER:=5.10
+KERNEL_TESTING_PATCHVER:=5.15
define Target/Description
Build firmware images for Ralink RT288x/RT3xxx based boards.
补丁文件下载：12_fix_hlk-7621.zip
